Abrasion Resistance EPDM Ceramic Hose Pipe The ceramic lined hose is a newly product in China. And the advanced technology is adopted from Japan. The hose is lined with ceramic wafer, which can reduce the internal damage and extend the working life.
It is a kind of hose, and in order to increase the abrasion resistance, the inner of the hose embedded ceramic wafer.
The hose, we adopted the EPDM, which are of the higher thermostability, moreover, it has the good eletric insulativity. The ceramic, we make use of the property of alumina ceramic to produce the ceramic wafer. The hos e is used for transferring the industrial waste and some material, such as coal powder, liquid or fluid ect. The temperature of waste is max 80 degree or more.
The ceramic lined hose is available for power plant, steel plant and cement industry etc
The advantages of our ceramic lined hose:
1. Higher abrasion and corrosion resistant than the steel and the service life is 5-10 times than the steel hose;
2. Decrease the use amount of the rubber and make a contribution to the emission reduction;
3. Reduce the cost of usage and the frequency of the replacement, then increase the economic effectiveness
| Inside diameter | outside diameter | working pressure | burst pressure | weight | bending radius |
| mm | inch | mm | inch | bar | psi | bar | psi | kg/m | lbs/ft | mm |
| 13 | 1/2 | 25 | 1 | 17 | 250 | 170 | 2500 | 0.53 | 0.36 | 91 |
| 19 | 3/4 | 32 | 1-7/32 | 17 | 250 | 170 | 2500 | 0.68 | 0.46 | 133 |
| 25 | 1 | 39 | 1-29/64 | 17 | 250 | 170 | 2500 | 0.90 | 0.62 | 175 |
| 32 | 1-1/4 | 46 | 1-13/16 | 17 | 250 | 170 | 2500 | 1.30 | 0.87 | 224 |
| 38 | 1-1/2 | 54 | 2-1/8 | 17 | 250 | 170 | 2500 | 1.60 | 1.10 | 266 |
| 51 | 2 | 67 | 2-41/64 | 17 | 250 | 170 | 2500 | 2.20 | 1.51 | 357 |
| 63 | 2-1/2 | 83 | 3-5/16 | 17 | 250 | 170 | 2500 | 3.80 | 2.61 | 445 |
| 76 | 3 | 95 | 3-13/16 | 17 | 250 | 170 | 2500 | 4.66 | 3.20 | 532 |
| 102 | 4 | 124 | 4-7/8 | 17 | 250 | 170 | 2500 | 6.50 | 4.46 | 714 |
